Contoh konfigurasi DSLAM 9800

######################################################################

# Welcome to ZTE Full Service Access Platform

# Press Return to get started

# Copyright 2005-2009 , ZTE Co.,Ltd.

######################################################################

Login:admin

Password:admin

fsap>enable

Please input password:admin

fsap# configure

fsap(config)#

fsap(config)# system hostname TBL DSLAM##-D4-BY

## number of new subrack
D4 Central java
BY short site name

TBL# show card

Slot Shelf Type Port BootVer SoftVer Status

----------------------------------------------------------------------

2 1 NO/ASNVC2 V1.0.6U2T7 V1.0.6U2T7 NotConfig (none)

4 1 NO/STNGB V1.0.6U1T7 V1.0.6U1T7 NotConfig

5 1 NO/STNGB V1.0.6U1T7 V1.0.6U1T7 NotConfig

9 1 CSCE 0 V1.0.6U2T7 V1.0.6U2T7 Main/SubCardMismatch

11 1 CSCE 0 V1.0.6U2T7 V1.0.6U2T7 Standby/SubCardMismatch

----------------------------------------------------------------------

TBL# add-card asnvc2 ?

2-8,10,12-17 - Assign a card number

TBL# add-card asnvc2 2 ?----->add card ADSL 2+ (asnvc2) in slot 2

self-shelf - Splitter card in self shelf

splitter-shelf - Splitter card in splitter shelf

TBL# add-card asnvc2 2 splitter-shelf ----->splitter put separated with the card

TBL# add-card asnvc2 3 splitter-shelf

TBL# add-card stngb ? ------> card SHDSL

3-8,10,12-17 - Assign a card number

TBL# add-card stngb 4

TBL# add-card stngb 5

TBL# add-subcard

CSC - Add sub-card in CSC slot

TBL# add-subcard csc ?-------> add controlling board

upside - Assign upside sub-card type

TBL# add-subcard csc upside

OGFA - FOUR_FE_F ports subcard

OGFB - FOUR_GE_F ports subcard

OGFM - FOUR_FE_F ports subcard

TGFC - FOUR_10/100/1000E_T ports subcard

SGFA - TWO_FE_F ports subcard

SGFB - TWO_GE_F ports subcard (giga Ethernet)

SGFM - TWO_FE_F ports subcard

SGFD - TWO_FE_F+TWO_10/100/1000E_T ports subcard

SGFE - TWO_GE_F+TWO_10/100/1000E_T ports subcard

SGFN - TWO_FE_F+TWO_10/100/1000E_T ports subcard

NONE - No subcard

TBL# add-subcard csc upside ogfb ?

underside - Assign underside sub-card type

TBL# add-subcard csc upside ogfb underside sgfb

TBL(config)# add-vlan 10 (vlan management)

TBL(config)# add-vlan 100 (vlan traffic)

TBL(config)# vlan 10 9/1 tag
TBL(config)# vlan 100 9/1 tag
TBL(config)# vlan 100 2/1-64 untag pvc 1
TBL(config)# vlan 100 3/1-64 untag pvc 1
TBL(config)# vlan 100 4/1-64 untag pvc 1
TBL(config)# vlan 100 5/1-64 untag pvc 1



TBL(config)# ip subnet 172.16.253.10 255.255.255.0 10 name TBL

TBL(config)# snmp-server host 172.16.253.100 NMS

TBL(config)# snmp-server community public rw ---> optional (ro or rw)

TBL(config)# adsl-profile ADSL384K


TBL(config)#
TBL(config)# adsl-profile ADSL384K

AtucConfRateMode(1-fixed,2-adaptAtStartup,3-adaptAtRuntime):[2]

AtucConfRateChanRatio(0..100):[0]

AtucConfTargetSnrMgn(0..310(0.1dB)):[80]

AtucConfMaxSnrMgn(80..310(0.1dB)):[310]

AtucConfMinSnrMgn(0..80(0.1dB)):[0]

AtucConfDownshiftSnrMgn(0..310):[0]

AtucConfUpshiftSnrMgn(0..310):[0]

AtucConfMinUpshiftTime(0..16383):[0]

AtucConfMinDownshiftTime(0..16383):[0]

ConfProfileLineType(1-fast-only ,2-interleaved-only):[2]

AtucChanConfFastMaxTxRate(0..102400kbps):[1024]384

AtucChanConfFastMinTxRate(0..384kbps):[0]

AtucChanConfInterleaveMaxTxRate(0..102400kbps):[1024]384

AtucChanConfInterleaveMinTxRate(0..384kbps):[0]

AtucChanConfMaxInterleaveDelay(0..255ms):[16]

AturConfRateMode(1-fixed,2-adaptAtStartup,3-adaptAtRuntime):[2]

AturConfRateChanRatio(0..100):[0]

AturConfTargetSnrMgn(0..310(0.1dB)):[80]

AturConfMaxSnrMgn(80..310(0.1dB)):[310]

AturConfMinSnrMgn(0..80(0.1dB)):[0]

AturConfDownshiftSnrMgn(0..310(0.1dB)):[0]

AturConfUpshiftSnrMgn(0..310(0.1dB)):[0]

AturConfMinUpshiftTime(0..16383):[0]

AturConfMinDownshiftTime(0..16383):[0]

AturChanConfFastMaxTxRate(0..10240kbps):[512]64

AturChanConfFastMinTxRate(0..64kbps):[0]

AturChanConfInterleaveMaxTxRate(0..10240kbps):[512]64

AturChanConfInterleaveMinTxRate(0..64kbps):[0]

AturChanConfMaxInterleaveDelay(0..255ms):[16]

AtucDMTConfFreqBinsOperType(1-open,2-cancel):[2]

AturDMTConfFreqBinsOperType(1-open,2-cancel):[2]

LineDMTConfEOC(1-byte ,2-streaming ):[1]

LineDMTConfTrellis(1-on,2-off):[1]

AtucConfMaxBitsPerBin(0..15):[15]

AtucConfTxStartBin(6..511):[32]

AtucConfTxEndBin(32..511):[511]

AtucConfRxStartBin(6..63):[6]

AtucConfRxEndBin(6..63):[60]

AtucConfUseCustomBins(1-on,2-off):[2]

AtucConfDnBitSwap(1-on,2-off):[2]

AtucConfUpBitSwap(1-on,2-off):[2]

AtucConfREADSL2Enable(1-on,2-off):[2]

AtucConfPsdMaskType(1-DMT_PSD_MSK,2-ADSL2_PSD_MSK,3-ADSL2_READSL_WIDE_PSD_MSK,4-ADSL2_READSL_NARROW_PSD_MSK):[2]

AtucConfPMMode(1-DISABLE,2-L2_ENABLE,3-L3_ENABLE,4-L3_ENABLE | L2_ENABLE):[1]

AtucConfPML0Time(0..255s):[240]

AtucConfPML2Time(0..255s):[120]

AtucConfPML2ATPR(0..31db):[3]

AtucConfPML2Rate(512..1024kbps):[512]

Press M or m key to modify, or the other key to complete?[C]

TBL(config)# port-location pppoe-plus enable

TBL(cfg-slot-adsl-2)# pppoe-plus enable

TBL(cfg-slot-adsl-2)# pvid 100 pvc 1

TBL(cfg-slot-adsl-2)# adsl profile toni

TBL(cfg-slot-adsl-2)# exit

TBL(cfg-slot-adsl-3)# pppoe-plus enable

TBL(cfg-slot-adsl-3)# pvid 100 pvc 1

TBL(cfg-slot-adsl-3)# adsl profile toni

TBL(cfg-slot-adsl-3)# exit

TBL(config)# uaps enable

TBL(config)# slot ?

adsl - Config the ADSL slot

eponr - Config the eponr slot

ethernet - Config the ethernet slot

shdsl - Config the Shdsl slot

vdsl - Config the VDSL slot

TBL(config)# slot ethernet 9

TBL(cfg-slot-eth-9)#

TBL(cfg-slot-eth-9)# up-link

1-6 - Assign an interface list

TBL(cfg-slot-eth-9)# up-link 1

TBL(cfg-slot-eth-9)# exit

TBL(config)# sho history

30 sho interface vlan 10

31 ip subnet 172.16.253.10 255.255.255.0 10 name TBL

32 snmp-server host 172.16.253.10

33 snmp-server community public rw

34 interface range adsl 2-3/1-64

35 pvid 100 pvc 1

36 exit

37 adsl-profile toni

38 adsl-profile toni

39 port-location pppoe-plus enable

40 slot adsl 2

41 pppoe-plus enable

42 pvid 100 pvc1

43 pvid 100 pvc 1

44 adsl profile toni

45 exit

46 slot adsl 3

47 adsl profile toni

48 pvid 100 pvc 1

49 pppoe-plus enable

50 exit

51 uaps enable

52 exit

53 show run

54 conf

55 slot ethernet 9

56 up-link 1

57 exit

58 show run

59 sho history

TBL(config)# exit

TBL# save

TBL# logout

Are you sure to quit? yes[Y] or no[N]:[N]y