######################################################################
# Welcome to ZTE Full Service Access Platform
# Press Return to get started
# Copyright 2005-2009 , ZTE Co.,Ltd.
######################################################################
Login:admin
Password:admin
fsap>enable
Please input password:admin
fsap# configure
fsap(config)#
fsap(config)# system hostname TBL DSLAM##-D4-BY
## number of new subrack
D4 Central java
BY short site name
TBL# show card
Slot Shelf Type Port BootVer SoftVer Status
----------------------------------------------------------------------
2 1 NO/ASNVC2 V1.0.6U2T7 V1.0.6U2T7 NotConfig (none)
4 1 NO/STNGB V1.0.6U1T7 V1.0.6U1T7 NotConfig
5 1 NO/STNGB V1.0.6U1T7 V1.0.6U1T7 NotConfig
9 1 CSCE 0 V1.0.6U2T7 V1.0.6U2T7 Main/SubCardMismatch
11 1 CSCE 0 V1.0.6U2T7 V1.0.6U2T7 Standby/SubCardMismatch
----------------------------------------------------------------------
TBL# add-card asnvc2 ?
2-8,10,12-17 - Assign a card number
TBL# add-card asnvc2 2 ?----->add card ADSL 2+ (asnvc2) in slot 2
self-shelf - Splitter card in self shelf
splitter-shelf - Splitter card in splitter shelf
TBL# add-card asnvc2 2 splitter-shelf ----->splitter put separated with the card
TBL# add-card asnvc2 3 splitter-shelf
TBL# add-card stngb ? ------> card SHDSL
3-8,10,12-17 - Assign a card number
TBL# add-card stngb 4
TBL# add-card stngb 5
TBL# add-subcard
CSC - Add sub-card in CSC slot
TBL# add-subcard csc ?-------> add controlling board
upside - Assign upside sub-card type
TBL# add-subcard csc upside
OGFA - FOUR_FE_F ports subcard
OGFB - FOUR_GE_F ports subcard
OGFM - FOUR_FE_F ports subcard
TGFC - FOUR_10/100/1000E_T ports subcard
SGFA - TWO_FE_F ports subcard
SGFB - TWO_GE_F ports subcard (giga Ethernet)
SGFM - TWO_FE_F ports subcard
SGFD - TWO_FE_F+TWO_10/100/1000E_T ports subcard
SGFE - TWO_GE_F+TWO_10/100/1000E_T ports subcard
SGFN - TWO_FE_F+TWO_10/100/1000E_T ports subcard
NONE - No subcard
TBL# add-subcard csc upside ogfb ?
underside - Assign underside sub-card type
TBL# add-subcard csc upside ogfb underside sgfb
TBL(config)# add-vlan 10 (vlan management)
TBL(config)# add-vlan 100 (vlan traffic)
TBL(config)# vlan 10 9/1 tag
TBL(config)# vlan 100 9/1 tag
TBL(config)# vlan 100 2/1-64 untag pvc 1
TBL(config)# vlan 100 3/1-64 untag pvc 1
TBL(config)# vlan 100 4/1-64 untag pvc 1
TBL(config)# vlan 100 5/1-64 untag pvc 1
TBL(config)# ip subnet 172.16.253.10 255.255.255.0 10 name TBL
TBL(config)# snmp-server host 172.16.253.100 NMS
TBL(config)# snmp-server community public rw ---> optional (ro or rw)
TBL(config)# adsl-profile ADSL384K
TBL(config)#
TBL(config)# adsl-profile ADSL384K
AtucConfRateMode(1-fixed,2-adaptAtStartup,3-adaptAtRuntime):[2]
AtucConfRateChanRatio(0..100):[0]
AtucConfTargetSnrMgn(0..310(0.1dB)):[80]
AtucConfMaxSnrMgn(80..310(0.1dB)):[310]
AtucConfMinSnrMgn(0..80(0.1dB)):[0]
AtucConfDownshiftSnrMgn(0..310):[0]
AtucConfUpshiftSnrMgn(0..310):[0]
AtucConfMinUpshiftTime(0..16383):[0]
AtucConfMinDownshiftTime(0..16383):[0]
ConfProfileLineType(1-fast-only ,2-interleaved-only):[2]
AtucChanConfFastMaxTxRate(0..102400kbps):[1024]384
AtucChanConfFastMinTxRate(0..384kbps):[0]
AtucChanConfInterleaveMaxTxRate(0..102400kbps):[1024]384
AtucChanConfInterleaveMinTxRate(0..384kbps):[0]
AtucChanConfMaxInterleaveDelay(0..255ms):[16]
AturConfRateMode(1-fixed,2-adaptAtStartup,3-adaptAtRuntime):[2]
AturConfRateChanRatio(0..100):[0]
AturConfTargetSnrMgn(0..310(0.1dB)):[80]
AturConfMaxSnrMgn(80..310(0.1dB)):[310]
AturConfMinSnrMgn(0..80(0.1dB)):[0]
AturConfDownshiftSnrMgn(0..310(0.1dB)):[0]
AturConfUpshiftSnrMgn(0..310(0.1dB)):[0]
AturConfMinUpshiftTime(0..16383):[0]
AturConfMinDownshiftTime(0..16383):[0]
AturChanConfFastMaxTxRate(0..10240kbps):[512]64
AturChanConfFastMinTxRate(0..64kbps):[0]
AturChanConfInterleaveMaxTxRate(0..10240kbps):[512]64
AturChanConfInterleaveMinTxRate(0..64kbps):[0]
AturChanConfMaxInterleaveDelay(0..255ms):[16]
AtucDMTConfFreqBinsOperType(1-open,2-cancel):[2]
AturDMTConfFreqBinsOperType(1-open,2-cancel):[2]
LineDMTConfEOC(1-byte ,2-streaming ):[1]
LineDMTConfTrellis(1-on,2-off):[1]
AtucConfMaxBitsPerBin(0..15):[15]
AtucConfTxStartBin(6..511):[32]
AtucConfTxEndBin(32..511):[511]
AtucConfRxStartBin(6..63):[6]
AtucConfRxEndBin(6..63):[60]
AtucConfUseCustomBins(1-on,2-off):[2]
AtucConfDnBitSwap(1-on,2-off):[2]
AtucConfUpBitSwap(1-on,2-off):[2]
AtucConfREADSL2Enable(1-on,2-off):[2]
AtucConfPsdMaskType(1-DMT_PSD_MSK,2-ADSL2_PSD_MSK,3-ADSL2_READSL_WIDE_PSD_MSK,4-ADSL2_READSL_NARROW_PSD_MSK):[2]
AtucConfPMMode(1-DISABLE,2-L2_ENABLE,3-L3_ENABLE,4-L3_ENABLE | L2_ENABLE):[1]
AtucConfPML0Time(0..255s):[240]
AtucConfPML2Time(0..255s):[120]
AtucConfPML2ATPR(0..31db):[3]
AtucConfPML2Rate(512..1024kbps):[512]
Press M or m key to modify, or the other key to complete?[C]
TBL(config)# port-location pppoe-plus enable
TBL(cfg-slot-adsl-2)# pppoe-plus enable
TBL(cfg-slot-adsl-2)# pvid 100 pvc 1
TBL(cfg-slot-adsl-2)# adsl profile toni
TBL(cfg-slot-adsl-2)# exit
TBL(cfg-slot-adsl-3)# pppoe-plus enable
TBL(cfg-slot-adsl-3)# pvid 100 pvc 1
TBL(cfg-slot-adsl-3)# adsl profile toni
TBL(cfg-slot-adsl-3)# exit
TBL(config)# uaps enable
TBL(config)# slot ?
adsl - Config the ADSL slot
eponr - Config the eponr slot
ethernet - Config the ethernet slot
shdsl - Config the Shdsl slot
vdsl - Config the VDSL slot
TBL(config)# slot ethernet 9
TBL(cfg-slot-eth-9)#
TBL(cfg-slot-eth-9)# up-link
1-6 - Assign an interface list
TBL(cfg-slot-eth-9)# up-link 1
TBL(cfg-slot-eth-9)# exit
TBL(config)# sho history
30 sho interface vlan 10
31 ip subnet 172.16.253.10 255.255.255.0 10 name TBL
32 snmp-server host 172.16.253.10
33 snmp-server community public rw
34 interface range adsl 2-3/1-64
35 pvid 100 pvc 1
36 exit
37 adsl-profile toni
38 adsl-profile toni
39 port-location pppoe-plus enable
40 slot adsl 2
41 pppoe-plus enable
42 pvid 100 pvc1
43 pvid 100 pvc 1
44 adsl profile toni
45 exit
46 slot adsl 3
47 adsl profile toni
48 pvid 100 pvc 1
49 pppoe-plus enable
50 exit
51 uaps enable
52 exit
53 show run
54 conf
55 slot ethernet 9
56 up-link 1
57 exit
58 show run
59 sho history
TBL(config)# exit
TBL# save
TBL# logout
Are you sure to quit? yes[Y] or no[N]:[N]y
Oktober 31, 2008
Contoh konfigurasi DSLAM 9800
ZXDSL 9210 Commissioning Manual
Basic Command
1. Login : admin
Password: admin
Login to the ZXDSL CLI console, default username is admin and the password is admin.
2. DSL#Show card
Show all of the card and their status on the ZXDSL 9210
3. DSL# erase
Delete all of the configuration that contain on the ZXDSL 9210. Please be careful to used this command, because it’s will erased all of the configuration on your system.
4. DSL#reboot
Reboot the ZXDSL 9210 and restart all of the board. Please be careful to used this command, because it’s will restart all of the board and the system will be down for a few second.
Change the ZXDSL 9210 Inband MAC address and identifier board
5. DSL#enable
Password : zxedsl
DSL$ debug module 12345
DSL$ debug module 888999 p1 00:d0:d0:00:00:01 (3 no terakhir => max 92:FF:FF)
DSL$ disable
DSL#reboot
This command used only if you are necessary to change the inband MAC address, if you first time build the ZXDSL 9210 network with more than one DSLAM please make sure there are no conflict MAC address on the each Network element(NE) on the same network. After you’re change this MAC address it’s will be take the effect after you’re reboot the system. After you change the MAC address and reboot the system, make sure the inband MAC address is already changed by type :
DSL# show ip subnet
6. DSL#config card slot 1 cardtype ASNVC2
7. DSL#config card slot 3 cardtype ATIGN ---spliter
Enable the PVLAN mode and initialize the uplink port
8. DSL#Configuration
[DSL(config)#pvlan-mode enable -> enable the pvlan mode]
DSL(config)#pvlan-mode uplink-port 1/1 ->initialize the uplink port for Gigabit Ethernet (biasanya ada di up-link 9/1 control modul yah..)
DSL(config)#pvlan-mode uplink-port-group 13/2 ->initialize the uplink port for Fe or Eth
DSL(config)#Exit
DSL#Copy running-config startup-config -> Save and commit all of the config
DSL#reboot -> after you’re enable the pvlan mode, it’s will be take the effect after you’re reboot the system
Add the Inband IP Address to the ZXDSL 9210
9. DSL#Configuration
DSL(config)#IP subnet 150.168.0.2 255.255.254.0 name dslam1
DSL(config)#exit
And then to make sure the IP address already adding to the ZXDSL 9210 type:
DSL#Show ip subnet
Add the Vlan and put the port into the Vlan
10. DSL#configuration
DSL(config)#add-vlan 2 -> add vlan 2
DSL(config)#add-vlan 3 -> add vlan 3
DSL(config)#vlan 2 1/1 tag -> put port 1/1 as an uplink to the switch into vlan 2 as a management vlan and tag it
DSL(config)#vlan 3 1/1 tag -> put port 1/1 as an uplink to the switch into vlan 3 as a PPPoe vlan and tag it
And then make sure the vlan are already exist and the port are already exist on the vlan by type:
DSL#Show vlan -> show all the vlan that already exist on the system
DSL#Show vlan 2-> show all the port(tag or untag) that are already exist on the vlan 2
DSL#Show vlan 3 -> show all the port(tag or untag) that are already exist on the vlan 3
Configure the adsl user on the ATIGN board
11. DSL#configure slot adsl 3
DSL(cfg-slot-adsl-3)#trap control enable -> to make if the subscriber in this board is on and then this board will know it
DSL(cfg-slot-adsl-3)#no shutdown
DSL(cfg-slot-adsl-3)#exit
DSL(config)#slot adsl 3
DSL(cfg-slot-adsl-3)#pvid 3 ->because of we configure the ADSL subscriber as an untag port so we need to add the pvid
DSL(cfg-slot-adsl-3)#atm pvc 8:81 ->configure the PVC(VCI/VCI) into the subscriber board
DSL(cfg-slot-adsl-3)#exit
DSL(config)#show atm vc slot 3 ->make sure the PVC are already exist at the subscriber board
DSL(config)#vlan 3 3/1-32 untag -> put the subscriber port into the vlan 3 as a subscriber vlan and untag it
Create the ADSL profile and apply the profile to the ADSL subscriber
12. DSL(config)#adsl-profile adsl512k -> this fist command is to created your profile. And then System will ask you this profile didn’t created before, are you sure want to create this profile? You should answer yes.
DSL(config)# adsl-profile adsl512k -> the second command is to configure your profile. And then system will ask you to input all of your configuration, but the most important you should configure the uplink and downlink rate:
• Downlink rate :
Atuchan conf fast max Tx rate [0-132040] (Def:8128) : 1024
Atuchan conf interleave max Tx rate [0-132040] (Def:8128) : 1024
• Uplink rate:
Aturhan conf fast max Tx rate [32-1536] (Def:1024) : 128
Aturhan conf interleave max Tx rate [32-1536] (Def:1024): 128
And then to make sure your ADSL profile is already created successfully type:
DSL#Show adsl profile -> show all adsl profile
DSL#Show adsl profile adsl512k -> show detail the adsl512k profile
DSL(config)#interface adsl 3/1 ->enter the adsl slot 3 port 1 to configure it
DSL(cfg-if-adsl-3/1)#adsl profile adsl512k ->apply the profile to adsl port
DSL(config)#slot adsl 3 -> enter the adsl slot 3 to configure it
DSL(cfg-slot-adsl-3)#adsl profile adsl512k ->apply the profile to adsl slot
Configure the ZXDSL 9210 SNMP server
13. DSL(config)#snmp-server host 10.10.10.1 private ->initialize the snmp server ip address to the ZXDSL 9210
DSL#show snmp -> show the snmp server ip address that you’re already initialize to the ZXDSl 9210
DSL(config)#ip route 0.0.0.0 0.0.0.0 192.168.0.1 -> add the static route to the ZXDSL 9210. This command is used only if the SNMP server Ip address is not in the same network segment with the ZXDSL 9210 ip address.
Configure Uplink port with the STP(Spanning tree protocol) features (gw blum pernah coba yang ini !!!)
14. kayanya siy niy beda card yang di slot, klo yang ada kan ASNVC2 dan PVNA buat splitter.
15. for example we want to configure the EICG board port 1 on the slot 1 and 2 as an uplink port with the STP features where EICG slot 1 port 1 and EICG slot 2 port 1 will be as a redundant uplink port.
DSL#show spanning-tree -> to show the STP features on the ZXDSL 9210 is already enable or not, if the status of STP is disable you should be enable it by type:
DSL#Config spanning-tree enable -> enable the STP features on the system
DSL#show spanning-tree -> make sure the STP features on the system is already enable. And please check the priority on this STP, the value of priority should be less then the priority value on the switch (Ethernet aggregator).
DSL#config interface Ethernet 1/1-> enter EICG slot 1 port 1 to configure it
DSL(cfg-if-eth-1/1)#spanning-tree enable->enable the STP features on the EICG slot 1 port 1.
DSL(cfg-if-eth-1/1)#show spanning-tree interface 1/1 -> make sure the STP features on the slot 1 port 1on is already enable
DSL#config interface Ethernet 2/1-> enter EICG slot 2 port 1 to configure it
DSL(cfg-if-eth-2/1)#spanning-tree enable->enable the STP features on the EICG slot 2 port 1.
DSL(cfg-if-eth-2/1)#show spanning-tree interface 2/1 -> make sure the STP features on the slot 2 port 1on is already enable
After you are already configure the STP features in both of port, you should be check the status of link in this port.
DSL(cfg-if-eth-1/1)#show spanning-tree interface 1/1 -> look the status of STP, there are 3 kind of status on this STP port :
1. blocking -> means the port is blocking and can’t transfer the packet
2. learning -> means the port still learning the other port, please waiting for a few minutes.
3. forwarding -> means the STP port is already active and ready to transfer the packet.
DSL(cfg-if-eth-1/2)#show spanning-tree interface 1/2 -> look the status of STP, the normal condition if port(1/1) and port (1/2) both of them as an STP port, one of them will be blocking and one of the other will be forwarding.
Oktober 26, 2008
Command dalam konfigurasi DSLAM Outdoor 9806
1. Melihat versi dari sccf yang digunakan :
Show version
Contoh :
DSLAM01-D4-FDLE-CML# show version
CardType Type VerNo VerLen Status BuildTime State FileName
------------------------------------------------------------------------------------------------------------------
SCCF MVER V1.2.0P5T1 3205768 VALID 20080731155431 active sccf.bin
SCCF BOOT V1.2.0P5T1 372880 VALID 20080731155519 backup BSCCF.bin
SCCF FW V1.2.0P3T1 1266942 VALID 20080327111628 backup SCCF_FW.bin
2. Melihat status card :
Show card
Contoh :
DSLAM01-D4-FDLE-CML# show card
Slot Shelf Type Port HardVer SoftVer Status
----------------------------------------------------------------------------
1 1 ASTEB 24 070100 V1.2.0P5T1 Inservice
2 1 ASTEB 24 070100 V1.2.0P5T1 Inservice
5 1 SCCF 2 070304 V1.2.0P5T1 Inservice
-----------------------------------------------------------------------------
3. Melihat profile ADSL
Show adsl profile
Contoh :
DSLAM01-D4-FDLE-CML# show adsl profile
All Existing Line Profiles :
1 : ADSL1M.PRF
2 : DIAR.PRF
3 : DEFVAL.PRF
4. Menambah profile adsl
Configure > adsl-profile (nama profile)
Contoh :
DSLAM01-D4-FDLE-CML# configure
DSLAM01-D4-FDLE-CML(config)# adsl-profile DIAR
5. Meng-edit profile adsl
Configure > adsl-profile ( nama profile yang telah di add )
Contoh :
DSLAM01-D4-FDLE-CML(config)# adsl-profile DIAR
AtucConfRateMode(1-fixed,2-adaptAtStartup,3-adaptAtRuntime):[2]
AtucConfRateChanRatio(0..100):[0]
AtucConfTargetSnrMgn(0..310(0.1dB)):[80]
AtucConfMaxSnrMgn(80..310(0.1dB)):[310]
AtucConfMinSnrMgn(0..80(0.1dB)):[0]
AtucConfDownshiftSnrMgn(0..310):[0]
AtucConfUpshiftSnrMgn(0..310):[0]
AtucConfMinUpshiftTime(0..16383):[0]
AtucConfMinDownshiftTime(0..16383):[0]
ConfProfileLineType(1-fast-only,2-interleaved-only):[2]
AtucChanConfFastMaxTxRate(0..102400kbps):[1024]
AtucChanConfFastMinTxRate(0..1024kbps):[32]
AtucChanConfInterleaveMaxTxRate(0..102400kbps):[1024]
AtucChanConfInterleaveMinTxRate(0..1024kbps):[32]
AtucChanConfMaxInterleaveDelay(0..255ms):[16]
AturConfRateMode(1-fixed,2-adaptAtStartup,3-adaptAtRuntime):[2]
AturConfRateChanRatio(0..100):[0]
AturConfTargetSnrMgn(0..310(0.1dB)):[80]
AturConfMaxSnrMgn(80..310(0.1dB)):[310]
AturConfMinSnrMgn(0..80(0.1dB)):[0]
AturConfDownshiftSnrMgn(0..310(0.1dB)):[0]
AturConfUpshiftSnrMgn(0..310(0.1dB)):[0]
AturConfMinUpshiftTime(0..16383):[0]
AturConfMinDownshiftTime(0..16383):[0]
AturChanConfFastMaxTxRate(0..10240kbps):[512]
AturChanConfFastMinTxRate(0..512kbps):[32]
AturChanConfInterleaveMaxTxRate(0..10240kbps):[512]
AturChanConfInterleaveMinTxRate(0..512kbps):[32]
AturChanConfMaxInterleaveDelay(0..255ms):[16]
AtucDMTConfFreqBinsOperType(1-open,2-cancel):[2]
AturDMTConfFreqBinsOperType(1-open,2-cancel):[2]
LineDMTConfEOC(1-byte ,2-streaming ):[1]
LineDMTConfTrellis(1-on,2-off):[1]
AtucConfMaxBitsPerBin(0..15):[15]
AtucConfTxStartBin(6..511):[32]
AtucConfTxEndBin(32..511):[511]
AtucConfRxStartBin(6..63):[6]
AtucConfRxEndBin(6..63):[31]
AtucConfUseCustomBins(1-on,2-off):[2]
AtucConfDnBitSwap(1-on,2-off):[2]
AtucConfUpBitSwap(1-on,2-off):[2]
AtucConfREADSL2Enable(1-on,2-off):[2]
AtucConfPsdMaskType(1-DMT_PSD_MSK,2-ADSL2_PSD_MSK,3-ADSL2_READSL_WIDE_PSD_MSK,4-ADSL2_READSL_NARROW_PSD_MSK):[3]
AtucConfPMMode(1-DISABLE,2-L2_ENABLE,3-L3_ENABLE,4-L3_ENABLE | L2_ENABLE):[1]
AtucConfPML0Time(0..255s):[240]
AtucConfPML2Time(0..255s):[120]
AtucConfPML2ATPR(0..31db):[3]
AtucConfPML2Rate(512..1024kbps):[512]
Press M or m key to modify, or the other key to complete?[C]
6. Melihat configurasi adsl profile
Show adsl profile ( nama profile adsl )
Contoh :
DSLAM01-D4-FDLE-CML# show adsl profile DIAR
AtucConfRateMode : fixed
AtucConfRateChanRatio : 99
AtucConfTargetSnrMgn : 99
AtucConfMaxSnrMgn : 99
AtucConfMinSnrMgn : 10
AtucConfDownshiftSnrMgn : 99
AtucConfUpshiftSnrMgn : 99
AtucConfMinUpshiftTime : 99
AtucConfMinDownshiftTime : 99
ConfProfileLineType : interleaved-only
AtucChanConfFastMaxTxRate : 1024
AtucChanConfFastMinTxRate : 32
AtucChanConfIntlvMaxTxRt : 1024
AtucChanConfIntlvMinTxRt : 32
AtucChanConfMaxIntlvDelay : 16
AturConfRateMode : adaptAtStartup
AturConfRateChanRatio : 0
AturConfTargetSnrMgn : 80
AturConfMaxSnrMgn : 310
AturConfMinSnrMgn : 0
AturConfDownshiftSnrMgn : 0
AturConfUpshiftSnrMgn : 0
AturConfMinUpshiftTime : 0
AturConfMinDownshiftTime : 0
AturChanConfFastMaxTxRate : 512
AturChanConfFastMinTxRate : 32
AturChanConfIntlvMaxTxRt : 512
AturChanConfIntlvMinTxRt : 32
AturChanConfMaxIntlvDelay : 16
AtucDMTConfFreqBins : FF FF FF FF FF FF FF FF
AturDMTConfFreqBins : FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF
LineDMTConfEOC : byte
LineDMTConfTrellis : on
AtucConfMaxBitsPerBin : 15
AtucConfTxStartBin : 32
AtucConfTxEndBin : 511
AtucConfRxStartBin : 6
AtucConfRxEndBin : 31
AtucConfUseCustomBins : off
AtucConfDnBitSwap : off
AtucConfUpBitSwap : off
AtucConfREADSL2Enable : off
AtucConfPsdMaskType : ADSL2_READSL_WIDE_PSD_MSK
AtucConfPMMode : DISABLE
AtucConfPML0Time : 240
AtucConfPML2Time : 120
AtucConfPML2ATPR : 3
AtucConfPML2Rate : 512
Adsl2ConfMinProtectionDs : noProtection
Adsl2ConfMinProtectionUs : noProtection
7. Menghapus profile adsl :
Configure > no adsl-profile ( nama adsl profile )
Contoh :
DSLAM01-D4-FDLE-CML#configure
DSLAM01-D4-FDLE-CML(config)# no adsl-profile DIAR
8. Melihat profile alarm adsl yang tersedia :
Show adsl alarm profile
Contoh :
DSLAM01-D4-FDLE-CML# show adsl alarm-profile
All Existing Alarm Profiles :
1 : DEFVAL.PRF
9. Menambah profile alarm adsl :
Configure > adsl-alarm-profile ( nama alarm profile )
Contoh :
DSLAM01-D4-FDLE-CML(config)# adsl alarm-profile COBA
10. Mengubah setingan adsl alarm profile :
Configure > adsl-alarm-profile ( nama alarm profile yang telah di add)
Contoh :
DSLAM01-D4-FDLE-CML#config
DSLAM01-D4-FDLE-CML(config)# adsl-alarm-profile COBA
AtucThresh15MinLofs(0..900s):[0]
AtucThresh15MinESs(0..900s):[0]
AtucThresh15MinLoss(0..900s):[0]
AtucThresh15MinLprs(0..900s):[0]
AtucThresh15MinLols(0..900s):[0]
AtucThreshFastRateUp(0..65535):[0]
AtucThreshInterleaveRateUp(0..65535):[0]
AtucThreshFastRateDown(0..65535):[0]
AtucThreshInterleaveRateDown(0..65535):[0]
AturThresh15MinLofs(0..900s):[0]
AturThresh15MinESs(0..900s):[0]
AturThresh15MinLoss(0..900s):[0]
AturThresh15MinLprs(0..900s):[0]
AturThreshFastRateUp(0..65535):[0]
AturThreshInterleaveRateUp(0..65535):[0]
AturThreshFastRateDown(0..65535):[0]
AturThreshInterleaveRateDown(0..65535):[0]
AtucInitFailureTrapEnable(1-enable,2-disable):[2]
AtucThreshold15MinFailedFastR(0..900s):[0]
AtucThreshold15MinSesL(0..900s):[0]
AtucThreshold15MinUasL(0..900s):[0]
AturThreshold15MinSesL(0..900s):[0]
AturThreshold15MinUasL(0..900s):[0]
AtucConnRateTolerance(0..100%):[0]
ThreshAtucConnRate(0..100000 kbps):[0]
AturConnRateTolerance(0..100%):[0]
ThreshAturConnRate(0..100000 kbps):[0]
Press M or m key to modify, or the other key to complete?[C]
11. Melihat profile alarm adsl :
Show adsl alarm-profile ( nama alarm profile )
Contoh :
DSLAM01-D4-FDLE-CML# sh adsl alarm-profile COBA
AtucThresh15MinLofs : 99
AtucThresh15MinESs : 99
AtucThresh15MinLoss : 99
AtucThresh15MinLprs : 99
AtucThresh15MinLols : 99
AtucThreshFastRateUp : 99
AtucThreshInterleaveRateUp : 99
AtucThreshFastRateDown : 99
AtucThreshInterleaveRateDown : 99
AturThresh15MinLofs : 99
AturThresh15MinESs : 99
AturThresh15MinLoss : 99
AturThresh15MinLprs : 99
AturThreshFastRateUp : 99
AturThreshInterleaveRateUp : 99
AturThreshFastRateDown : 99
AturThreshInterleaveRateDown : 99
AtucInitFailureTrapEnable : 2
AtucThreshold15MinFailedFastR : 99
AtucThreshold15MinSesL : 99
AtucThreshold15MinUasL : 99
AturThreshold15MinSesL : 99
AturThreshold15MinUasL : 99
AtucConnRateTolerance : 0
ThreshAtucConnRate : 0
AturConnRateTolerance : 0
ThreshAturConnRate : 0
12. Menghapus adsl alarm profile :
Configure > no adsl-alarm-profile ( nama adsl alarm profile )
Contoh :
DSLAM01-D4-FDLE-CML#configure
DSLAM01-D4-FDLE-CML(config)# no adsl-alarm-profile DIAR
13. melihat vlan yang terpasang :
show vlan
contoh :
DSLAM01-D4-FDLD-CML# show vlan
total number : 6
-----------------------------------
1,20,162,655,657,1000
14. menambah vlan :
Configure > add-vlan (no vlan)
Contoh:
DSLAM01-D4-FDLD-CML# config
DSLAM01-D4-FDLD-CML(config)# add-vlan 1000
15. menghapus vlan :
configure > no add-vlan (no vlan)
Contoh :
DSLAM01-D4-FDLD-CML# config
DSLAM01-D4-FDLD-CML(config)# add-vlan 1000
Oktober 24, 2008
Topologi Jaringan Adsl Divre 7
Topologi ini akan menentukan vlan-vlan outdoor maupun indoor mana yang dicascade dan mana yang point-to-point....
DEbuggIng OutDoor DSLAM 9806 ZTE
# Copyright 2005-2009 , ZTE Co.,Ltd. #
# #
WDB: Ready.
######################################################################uccess!
DosFs initalize su
Login:admin
Password:pe SCCF
9806>enable-> shell re
Please input password:
hwIpmuxXdslMode=0
9806# config
9806(config)# add-vl
9806(config)# vlan 26 1-4/1-24 untag
the delay is 0
Bridg
9806(config)# vlan 26 5/1 tag
init boardinfo...
9806(config)# vlan 100 5/1-2 tag34IPMux DMA initialized ok, buff
9806(config)# vlan 27 5/1 tag
9806(config)# vlan 27 5/1-2 tag
hwIPmuxPortInit
9806(config)# vlan 26 5/1-2 tag
9806(config)# vlan 28 5/1-2 tag endinit trunkinfo...
9806(config)# ip subnet 172.16.253.26 255.255.255.0 100.
init qos...
init pvlan...
9806(config)# ip route 0.0.0.0 0.0.0.0 172.16.253.1
init stats...
init pvc...
9806(config)# snmp-server host 172.16.253.5 privatend interface name lnFe0
Error: Invalid pa
Error: Bad command #
9806(config)# slot adsl
Error: Bad command
9806(config)# pvid 26
Error: Bad command
9806(config)# interface range adsl 3-4/1-24 Press Return to get started
9806(cfg-if-range-adsl)# pvid 26 pvc 1
9806(cfg-if-range-adsl)# atm pvc 1
Error: Missing parameter
9806(cfg-if-range-adsl)# atm pvc 1 vpi Copyright 2005-2009 , ZTE Co
Error: Missing parameter data
9806(cfg-if-range-adsl)# atm pvc 1 v
9806(cfg-if-range-adsl)# atm pvc
1-8 - Assign a pvc id#######################################
9806(cfg-if-range-adsl)# atm pvc 1
vpi - Assign a vpi valuessword:
9806>system hostname TEL
9806(cfg-if-range-adsl)# atm pvc 1 vpi 8command
9806>enable
vci - Assign a vci value
9806# system hostname TELKOM
9806(cfg-if-range-adsl)# atm pvc 1 vpi 8 vci 81
9806# config
98
9806(cfg-if-range-adsl)# port-location ppoe-plus enable
GCI(config)# show card
Error: Bad command Port HardVer
9806(cfg-if-range-adsl)# exit
9806(config)# adsl-profile tonijelek------------------------------------
9806(config)# adsl-profile tonijelek
Are you sure to reboo
AtucChanConfInterleaveMinTxRate(0..384kbps):[0]xit: [N]y
AtucChanConfMaxInterleaveDelay(0..255ms):[16]
initString = lnFe 626 .Mips 4KEc
AturConfRateMode(1-fixed,2-adaptAtStartup,3-adaptAtRuntime):[2]/133/66/66MHz
AturConfRateChanRatio(0..100):[0]
I
AturConfTargetSnrMgn(0..310(0.1dB)):[80]
RISC Microcode Re
AturConfMaxSnrMgn(80..310(0.1dB)):[310]
DDR SDRAM : 64-Mbyte, 16-bit wi
AturConfMinSnrMgn(0..80(0.1dB)):[0]BSP revision 1.2/5
AturConfDownshiftSnrMgn(0..310(0.1dB)):[0]
Made on Nov 6 2007, 15:21
AturConfUpshiftSnrMgn(0..310(0.1dB)):[0]dth=0x2
TFFS device create
AturConfMinUpshiftTime(0..16383):[0]DosFs initalize success!
AturConfMinDownshiftTime(0..163
active
AturChanConfMaxInterleaveDelay(0..255ms):[16]File: /DATA/version/SCCF\sccf.bin VerSize = 2
AtucDMTConfFreqBinsOperType(1-open,2-cancel):[2]
inflate success.
run
AturDMTConfFreqBinsOperType(1-open,2-cancel):[2]0205)!
LineDMTConfEOC(1-byte ,2-streaming ):[1]
usrNetInit
LineDMTConfTrellis(1-on,2-off):[1]
Ta
AtucConfMaxBitsPerBin(0..15):[15]
User: target
i
AtucConfTxStartBin(6..511):[32]evLoad
initString = l
AtucConfTxEndBin(32..511):[511]pmuxF
9806(config)#
Net in
9806(config)#
Adding
9806(config)#for standalon
9806(config)#
9806(config)#String = lnFe
9806(config)#ps/ipmux_e/ln
9806(config)#
9806(config)# adsl-profile tonijelek
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
AtucConfRateMode(1-fixed,2-adaptAtStartup,3-adaptAtRuntime):[2]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
AtucConfRateChanRatio(0..100):[0]]]]]]]]]]]]]
AtucConfTargetSnrMgn(0..310(0.1dB)):[80]] ]]]]]]]]]] ]] ]
AtucConfMaxSnrMgn(80..310(0.1dB)):[310]
AtucConfMinSnrMgn(0..80(0.1dB)):[0]]] ]]]]]]]] ]]
AtucConfDownshiftSnrMgn(0..310):[0]
AtucConfUpshiftSnrMgn(0..310):[0]]]]]] ] ]] ]]]
AtucConfMinUpshiftTime(0..16383):[0
AtucChanConfInterleaveMinTxRate(0..384kbps):[0] ]]]]]]]] ]]]]
AtucChanConfMaxInterleaveDelay(0..255ms):[16]384
]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]
Invalid value ]]]] ]]]]
9806(config)# adsl-profile tonijelek
AtucConfRateMode(1-fixed,2-adaptAtStartup,3-adaptAtRuntime):[2]]]] ]]]] ]]]] ]]]]]
AtucConfRateChanRatio(0..100):[0]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]
AtucConfTargetSnrMgn(0..310(0.1dB)
]]]
AtucConfMinUpshiftTime(0..16383):[0] WIND version 2.6
AtucConfMinDownshiftTime(0..16383):[0]
]]]]]]]]]]]]]]]]]]]]]]]]] Copy
ConfProfileLineType(1-fast-only,2-interleaved-only):[2]
AtucChanConfFastMaxTxRate(0..102400kbps):[384]ips 4KEc. Processor #0.
AtucChanConfFastMinTxRate(0..384kbps):[0] Memory Size:
AtucChanConfInterleaveMaxTxRate(0..102400kbps):[384]
AtucChanConfInterleaveMinTxRate(0..384kbps):[0]OMM_END
AtucChanConfMaxInterleaveDelay(0..255ms):[16]DB: Ready.
-> shell restarted.
AturConfTargetSnrMgn(0..310(0.1dB)):[80]
Ipmux mode init. h
AturConfMaxSnrMgn(80..310(0.1dB)):[310]de 2, hwPhyNumPerGroup
AturConfMinSnrMgn(0..80(0.1dB)):[0]
24, hw
AturConfDownshiftSnrMgn(0..310(0.1dB)):[0]
AturConfUpshiftSnrMgn(0..310(0.1dB)):[0]cBundleInit
init boar
AturConfMinUpshiftTime(0..16383):[0].
34IPMux DMA initialize
AturConfMinDownshiftTime(0..16383):[0]
AturChanConfFastMaxTxRate(0..10240kbps):[512]64ortInit ... endinit vlan...
AturChanConfFastMinTxRate(0..64kbps):[0]muxVlanInit ... endinit trunki
AturChanConfInterleaveMaxTxRate(0..10240kbps):[512]64
init l2...
init qos...
LineDMTConfTrellis(1-on,2-off):[1]
# W
AtucConfMaxBitsPerBin(0..15):[15]Platform #
AtucConfTxStartBin(6..511):[32]
#
AtucConfTxEndBin(32..511):[511]
AtucConfRxStartBin(6..63):[6]
AtucConfRxEndBin(6..63):[31] Press Return to get s
AtucConfUseCustomBins(1-on,2-off):[2]
AtucConfDnBitSwap(1-on,2-off):[2]
AtucConfUpBitSwap(1-on,
Password:
AtucConfPML0Time(0..255s):[240]
Error: Bad command
AtucConfPML2Time(0..255s):[120]
Please input password:
AtucConfPML2ATPR(0..31db):[3]
9806(config)# sys
AtucConfPML2Rate(512..1024kbps):[512]
TELKOM(config)# ad
Press M or m key to modify, or the other key to complete?[C]lan 26
TELKOM(config)# add-vlan
9806(config)# interface range adsl 3-4/1-24# add-vlan 28
T
9806(cfg-if-range-adsl)# adsl profile tonijelek
TELKOM(config)# add-vla
TELKOM(config)# vlan
9806(config)# show run
TEL
add-card SSTEB 1 30 5/1 tag
add-card SSTEB 2
TELKO
add-card ASTEB 3net 172.16.253.2
add-card ASTEB 400
end
configure
add-vlan 26-28,100ELKOM(config)# snmp
adsl-profile TONIJELEK.PRF
startup adsl-profile TONIJELEK.PRF cFastMaxTxRate 384 cInterMaxTxRate 384
Error: Invalid para
startup adsl2-profile TONIJELEK.PRF rFastMaxTxRate 64 rInterMaxTxRate 642.16.253.1
Error: Inv
adsl-profile TONIJELEK.PRF atuc-i
TELKOM(config)# adsl-pr
snmp-server host 172.16.253.1
TELKOM(c
snmp-server host 172.16.253.5
snmp-server host 172.16.253.104adaptAtStartup,3-adaptAtRuntime)
traffic-manage queue-schedule strict-priority wrr 0,0,0,0
AtucConfRateChanRatio(0..100):[0]
end
configure interface adsl 3/1gn(0..310(0.1dB)):[80]
adsl profile TONIJELEK.PRF
AtucConfMaxSnrMgn(80..31
pvid 26 pvc 1
pppoe-plus enable
AtucConfMinSnrMgn(0
end(0.
configure interf
end84k
configure interface adsl 3/5
AtucCha
adsl profile TONIJELEK.PRF2400kbps):[1024]384
pvid 26 pvc 1
pppoe-plus enablenConfInterleaveMinTx
end(0.
configure interface adsl 3/6
adsl profile TONIJELEK.PRFelay(0..255ms):[16]
pvid 26 pvc 1
pppoe-plus enable-fixed,2-adaptAtStar
end3-a
configure interface adsl 3/7
adsl profile TONI
configure interface adsl 3/8
adsl profile TONIJELEK.PRF0..310(0.1dB)):[310]
pvid 26 pvc 1
At
pppoe-plus enable(0.1dB)):[0]
end
configure interface adsl 3/9DownshiftSnrMgn(0..310(0.1dB
adsl profile TONIJELEK.PRF
AturConfUp
pvid 26 pvc 10(0.1dB)):[0]
pppoe-plus enable
Atu
endfMi
configure interface adsl 3/10
adsl profile TONIJELEK.PRF..16383):[0]
pvid 26 pvc 1
AturChanCon
pppoe-plus enable40kbps):[512]64
end
configure interface adsl 3/11
AturChanConfFastMinTxRa
adsl profile TONIJELEK.PRF
A
pvid 26 pvc 1eaveMaxTxRate(0.
pppoe-plus enable
end
configure interface adsl 3/12hanConfInterleaveMinTxRate(0.
adsl profile TONIJELEK.PRF
pvid 26 pvc 1
end
configure interface adsl 3/14
LineDMTConfEOC(1-byt
adsl profile TONIJELEK.PRF
pvid 26 pvc 1lis(1-on,2-off):
pppoe-plus enable
Atu
endfMa
configure interface adsl 3/15
At
adsl profile TONIJELEK.PRF
pvid 26 pvc 1n(32..511):[511]
pppoe-plus enable
AtucConfR
endrtB
configure interface adsl 3/16
AtucConfRxEndBin
adsl profile TONIJELEK.PRF
AtucConfUseCustomB
pvid 26 pvc 12]
pppoe-plus enable
AtucConfDnBitSwap
endn,2
configure interface adsl 3/17
AtucConfUpBitSwa
adsl profile TONIJELEK.PRF
AtucConf
pvid 26 pvc 1n,2-off):[2
pppoe-plus e
add-vla
pvid 26 pvc 1
adsl-prof
pppoe-plus enable
AtucConfPML0Time
end255
configure interface adsl 3/20 512 cInt
AtucConfPML2Time(0.
adsl profile TONIJELEK.PRF
AtucConfPML2ATP
pvid 26 pvc 1sl2-profile GCI.
pppoe-plus enableL2Rate(512..1024kbps
end12]
configure interface adsl 3/21
Invalid value
adsl profile TONIJELEK.PRFtuc-inp 1 a
TELKOM(config)#
pvid 26 pvc 1
pppoe-plus enableommand255.0.0
end
configure interface adsl 3/22172.16.2
add-vlan
adsl profile TONIJELEK.PRF
pvid 26 pvc 1 - C
pppoe-plus enableer
end
pppoe-plus enable hostname
end
configure interface adsl 4/1ure CTPID of systemplus enab
adsl profile TONIJELEK.PRF
traf
interface
pvid 26 pvc 1nterface configu
pppoe-plus enable
end
configure interface adsl 4/2 - Configu
adsl profile TONIJELEK.PRF
GCI(config)# erase config
pvid 26 pvc 1 - Conf
pppoe-plus enable
GCI(config)#
endse
configure interface adsl 4/3 - Configure inband/out
adsl profile TONIJELEK.PRFI(config)#
GCI(c
pvid 26 pvc 1ble - Configu
pppoe-plus enableparameans
end
configure interfac
pvid 26 pvc 1
pppoe-plus enableort-location
endnfi
configure interface adsl 4/7
adsl profile TONIJELEK.PRF - Configure QOS parametersti
pvid 26 pvc 1
pppoe-plus enable-server - Con
endre
configure interface adsl 4/8ameters
adsl profile TONIJELEK.PRFnfigure save-intervalConfigur
pvid 26 pvc 1
pppoe-plus enablerofile - Configure
endDSL
configure interface adsl 4/9
adsl profile TONI
configure interface adsl 4/10snmp-server - Config
adsl profile TONIJELEK.PRFess-list parameters
pvid 26 pvc 1 -
pppoe-plus enable modem-vlan
endCon
configure interface adsl 4/11Configure spanning-tree
adsl profile TONIJELEK.PRF
multi
ssh-server
pvid 26 pvc 1ssh global infor
pppoe-plus enable
end
configure interface adsl 4/12 - Configure STPID of s
adsl profile TONIJELEK.PRF
sys
pvid 26 pvc 1 - Configure sys
pppoe-plus enable - Configure port-lo
endon
configure interface adsl 4/13-check - Enable/disable te
adsl profile TONIJELEK.PRFmeters
pvid 26 pvc 1
rad
t
pppoe-plus enable Configure traffic m
ende
configure interface adsl 4/14
save-
uaps
adsl profile TONIJELEK.PRF
pvid 26 pvc
end al
configure interface adsl 4/16
adsl profile TONIJELEK.PRFo - Configure a vdsl2 channel
pvid 26 pvc 1
pppoe-plus enable- Configure spanning
end vd
configure interface adsl 4/17 a vdsl2 channel profilever
adsl profile TONIJELEK.PRFl information
vdsl2
pvid 26 pvc 1 Configure the v
pppoe-plus enable - Configure
endID
configure interface adsl 4/18 - Configure a vdsl2 line pr
adsl profile TONIJELEK.PRFure system parameters
pvid 26 pvc 1 - Configur
pppoe-plus enablere-check - Enable
endabl
configure interface adsl 4/19 - Configure vlan
adsl profile TONIJELEK.PRF
traffic-manage -
pvid 26 pvc 1#ma
pppoe-plus e
adsl profile TONIJELEK.PRF
TELKOM(config)#figure uplin
pvid 26 pvc 1g)#
pppoe-plus enabledsl2-alarm-pr
TELKO
endnfi
configure interface adsl 4/21fig)#
TELKOM(
adsl profile TONIJELEK.PRFM(config)#late - Configur
TE
pvid 26 pvc 1
pppoe-plus enable
end
configure interface adsl 4/24
adsl profile TONIJELEK.PRF
pvid 26 pvc 1
pppoe-plus enable
end
configure
vlan 26 1/1-24 untag pvc 1
vlan 26 2/1-24 untag pvc 1
vlan 26 3/1-24 untag pvc 1
vlan 26 4/1-24 untag pvc 1
vlan 26 5/1-2 tag
vlan 27 5/1-2 tag
vlan 28 5/1-2 tag
vlan 100 5/1-2 tag
9806(config)# exit
9806# save
9806#
CARA KERJA ADSL
Teknologi ADSL (lanjutan)
Cara Kerja Teknologi ADSL
Proses “dial – up connection“ mendasari kinerja ADSL. Ketika ada permintaan dari user atau pelanggan, maka modem ADSL di sisi sentral akan langsung memprosesnya dengan cara memisahkan antara informasi data, suara atau multimedia yang dilakukan oleh splitter. Berbeda halnya dengan jaringan fixed telephone yang menggunakan proses “call set-up“ yang harus melalui proses dial tone terlebih dahulu.
Selanjutnya informasi tersebut akan dilewatkan melalui MDF-RK-DP hingga KTB, kemudian di sisi pelanggan informasi data tersebut masuk ke splitter lagi, jika informasinya berupa akses internet (data) maka akan dimasukkan ke modem ADSL sisi pelanggan diteruskan ke PC user, jika berupa suara dari splitter langsung ke telepon, jika yang diminta video dari splitter masuk ke modem ADSL lalu masuk ke Set Top Box (STB) baru ke layar TV.
Kelebihan Penggunaan Teknologi ADSL
Adapun kelebihan yang dimiliki jaringan broadband ADSL ini diantaranya adalah:
Mudah dalam instalasi.
Hemat investasi karena menggunakan jaringan kabel existing untuk pengembangan jaringan baru.
Menawarkan kecepatan hingga 125x lebih cepat dibandingkan dengan 56k modem.
Koneksi yang mudah sehingga tidak perlu melakukan dial-up lagi.
Kestabilan koneksi dan keamanan lebih terjamin karen koneksi dilakukan dengan kabel sendiri yang bersifat point-to-point.
ADSL memberikan kemampuan Internet dan Voice/Fax secara simultan. Ini berarti kita dapat Surfing internet dan menggunakan Telepon atau Fax pada saat bersamaan. Ini akan memberikan kepuasan untuk menikmati High-Speed Internet Access tanpa kehilangan kontak telepon dengan relasi.
Trafik menerima data lebih besar daripada pengiriman, sehingga cocok digunakan pada level pengguna akhir, seperti untuk kebutuhan multimedia.
Kekurangan Aplikasi ADSL
Ibaratnya manusia, tidak ada manusia yang sempurna. Begitu pula dengan ADSL sendiri, memiliki kekurangan dalam penggunaannya. Diantaranya adalah sebagai berikut:
Menurunnya kualitas sambungan dan kecepatan transfer data akibat jauhnya jarak user dengan STO
Kabel tembaga tua dapat menurunkan kualitas sambungan dan menurunkan kecepatan.
Koneksi asimetris berarti waktu upload akan lebih lama daripada download.
Cakupan area yang sempit, maksimal 5.5 km dalam keadaan normal.
Kesimpulan
Dengan melihat kemampuan dan kekurangan dari system ADSL ini, setidaknya kita memiliki alternatif penggunaan layanan sesuai kebutuhan dengan pertimbangan-pertimbangan tertentu.
Kita boleh gigit jari dengan perkembangan jaringan internet broadband di luar negeri jauh lebih dulu menggunakan broadband berkecepatan super untuk perumahan sekalipun. Itu adalah realita yang patut kita contoh, setidaknya kita tidak ‘gaptek’ alias ‘gagap teknologi’. Apalagi, seperti yang dilansir salah satu majalah komputer negeri ini bahwa menurut survei yang dilakukan Pemerintah Thailand pada tahun 2003, menuliskan bahwa tenaga ahli informasi Indonesia berada pada jajaran unggul, setara dengan tenaga ahli USA, bahkan jauh mengungguli tenaga ahli dari Malaysia, Thailand dan Singapura sekalipun. Patut berbangga hatilah kita, mendapat penilaian positif terhadap sumber daya manusia Indonesia.
CARA KERJA ADSL
INTEGRASI DSLAM 9800
Try and error. Today ( 15 august 07 )i have an opportunity to try and error a good product. It is a DSLAM. A product that should i set. the vendor is ZTE. i dont have any background about zte product.But i think its the time for me to get new knowledge about dslam.Here is my configuration:
****************************************************************
* _______ _________ _______ __ __ __ __ *
* |____ / |___ ___| | _____| ____| |____ \ \ \ \ / / *
* / / | | | | | __ __ | \_\ \_\ /_/ *
* / / | | | |_____ | |_ | |__| | _________ *
* / / | | | ____| |____ ____| |_________| *
* / / | | | | | | __ __ *
* / /____ | | | |_____ | | / / \ \ *
* /_______| |_| |_______| |__| /__/ \__\ *
* *
* *
* ( ZXDSL - 9000 ) *
****************************************************************
Login:
# insert your login and password.
it will be like this :
config #
lets create each slot of dslam;
config # card slot 1 cardtype ASIKB // ASIKB or ASIGN it’s depend on card type of DSLAM. And do it until the last slot.. Usually 14 ports.
Creat Your DSLAM name :
config # system prompt DSLAM01-BIMO-TRYnERROR // what ever you want
Create your vlan management :
config # add-vlan 8008 // what ever you want. It is a vlan management.
assign an uplink traffic.
config # vlan 8008 14/1-3 tag // according an active uplink.. In this case, slot 14 from port 1 until 3.
Create your dslam ip address
config # ip subnet 123.456.789.001 255.255.255.0 8008
Create snmp server host
config # snmp-server host 123.456.789.020 private
Create vlan downlink traffic fo customer.
config # add-vlan 1234
create uplink for customer traffic.
config #vlan 1234 14/1-3 tag // if uplink in slot 14
Create downlink for customr traffic
config #vlan 1234 1-13/1-48 untag // slot 1 to 13 and each slot consist of 48 ports.
Activated PPPOE-plus command
config # pppoe-plus enable
Activated pvlan-mode
config #pvlan-mode enable
Activated uplink pvlan
config #pvlan-mode uplink-port 14/1,2,3 // depend on your EICG modul . in this case is in modul 14
Create adsl profile
config # adsl profile dsl384
PS:Q-quit AtucConfRateMode[fix(1),adaptAtStart(2),adaptAtRun(3)](Def:2)
AtucConfRateChanRatio [0-100](Def:0)50
AtucConfTargetSnrMgn [0-310](Def:80)
AtucConfMaxSnrMgn [0-310](Def:310)
AtucConfMinSnrMgn [0-310](Def:0)
AtucConfDownshiftSnrMgn [0-310](Def:50)
AtucConfUpshiftSnrMgn [0-310](Def:110)
AtucConfMinUpshiftTime [0-16383](Def:30)
AtucConfMinDownshiftTime [0-16383](Def:30)
AtucChanConfFastMinTxRate[32-131040](Def:32)
AtucChanConfInterMinTxRate[32-131040](Def:32)
AtucChanConfFastMaxTxRate[32-131040](Def:32736)384
AtucChanConfInterMaxTxRate[32-131040](Def:32736)384
AtucChanConfMaxInterDelay[0-255](Def:32)
AturConfRateMode[fixed(1),adaptAtStartup(2),adaptAtRuntime(3)](Def:2)
AturConfRateChanRatio [0-100](Def:0)
Now lets create all slot/port Dslam *:
config # slot dsl-mpvc 1
config # pvid 1234 pvc 1
config # atm-pvc 8:81 pvc1
config # pppoe-plus enable
config # adsl-profile dsl384
config # adsl-transmode // choose 1 for STIGN card or choose 4 for ATIGN card . in this case i choose no.4
* do it the same things until slot 14
Save all configuration
config # copy ru st
config # save slaveSCB
Write Enable first if your dslam is ATIK. to save your configuration
After finished it, now you must open an vlan traffic in Aggregator and BRAS.
Now lets configure an aggregator
———————————————————————-
ZXR10-C9000 System Software, Version 9.4.0.4 NX
Zhongxing Telecom Ltd.
System started on 2006-05-10 08:59:12
———————————————————————-
Press RETURN to activate console . . .
Password:
T32C-xxx> ena
Password:
T32C-xxx#configure
T32C-xxx(config)# vlan create 1234 id 1234 port-based
T32C-xxx(config)# vlan add ports gi.(4-6).(1-2) to 1234
T32C-xxx(config)# exit
lets see our configuration:
# sh run
now, lets configure the BRAS
BRAS-xxx-xxx
SELAMAT DATANG DI BRAS-@@@
login: —-> input your login
Password: —> input your password
[local]BRAS-xxx#conf
Enter configuration commands, one per line, ‘end’ to exit
[local]BRAS-xxx(config)#
[local]BRAS-xxx(config)#port eth 2/3 //port aktif yang menlayani paket vlan dari dslam
[local]BRAS-xxx(config)# dot1q pvc 1234 encapsulation pppoe
[local]BRAS-xxx(config)#bind auth chap pap max 8000
[local]BRAS-xxx(config)# commit
let see our configuration
[local]BRAS-xxx# sh conf
finish.
Dari WWW.BIMO.WEB.ID
